intake manifold

Remove the intake manifold ( refer to Group 11 , Exhaust System and Intake Manifold ).

拆下进气歧管 ( 见单元11-排气系统和进气歧管 ).

Remove intake manifold bolts.

拆下进气歧管螺栓.

Direct gasoline injection and hydrogen intake manifold supply.

直喷式汽油和氢气进气歧管供应.

Remove intake manifold, yoke retainer and aligning yokes.

拆下进气歧管 、 叉臂轭护圈,并对正叉臂轭.

At present, the gasoline engine plastic intake manifold design technology is mature. The domestic could conduct independent research and development ( R& D).

目前，汽油机塑料进气歧管的设计技术上已经成熟，国内已经可以自主研发并进行大批量生产，而柴油机塑料进气歧管的设计还处于起步阶段。

We specialize in making plastic air intake manifold . Welcome contact me for more information!

我们公司专业生产塑料进气歧管, 欢迎有需要的福友与我联系!

This device, called the manifold heat-control valve, is built into the exhaust and intake manifold.

这种装置称为“歧管热控制阀”, 它拼装在排气与进气歧管中.

Vibration Test Failure Analysis on Engine Plastic Intake Manifold and Improvement Study

发动机塑料进气歧管振动试验失效分析与改进研究

Install the intake manifold ( refer to Group 11 , Exhaust System and Intake Manifold ).

安装进气歧管 ( 见单元11-排气系统和进气歧管 ).

When there is vacuum in the intake manifold, the vacuum holds the diaphragm up.

当进气歧管有真空存在时, 真空便向上吸引膜片.

The main difference is how they move air to the intake manifold of the engine.

这三种形式主要的不同在于它们把空气引入吸气导管的方式.

Fault Description ( reason ): High voltage detected at intake manifold pressure sensor signal pin.

故障描述 ( 原因 ): 检测到进气歧管压力传感器信号电压值高.

This vacuum, called intake-manifold vacuum, varies as the operating conditions change.

这个真空叫做进气歧管真空.这种进气歧管真空随运转情况而变化.

Ultrasonic welding machine can attain to bonding automotive parts, such as intake manifold, instrument panels, tail lights and bumpers, etc.

臻能超声波焊接机可接合汽车部件，例如进气歧管、仪表板、尾灯及保险杠等；

During the developing process of one V-6 type engine intake manifold with 319.0 alloy, many defects as shrinkage and pin hole occurred frequently, which hindered its normal supply and thus affected the OEMs productivity.

国内某款乘用车V型6缸发动机进气歧管（319.0）开发过程中，屡屡出现缩孔、气（针）孔等铸造缺陷，严重地影响了供应商的正常供货以及整车厂产能的提升。

In the roundpiston VV carburetor, the piston is moved by intake-manifold vacuum.

在圆形活塞的VV化油器中, 活塞是由进气歧管真空移动的.

If the engine backfires , the sudden pressure in the intake manifold forces the valve back.

如果发动机回火, 进气歧管骤增的压力就迫使阀门向后移动.